KABU BOND 10 LTR

Description

DESCRIPTION
KABU BOND is an Acylic co-polymer emulsion, supplied as a ready to use bonding agent in liquid consistency. It is a versatile product and can be used as a cement modifier for repair of spalled concrete – slabs, balconies, beams, columns, floors & waterproofing of toilets, bathrooms and terraces. KABU BOND plays major role in facade coating system . It forms a dry water repellent zone beneath the coating consolidate the substrate and enhance bonding of the coating . It is gas permeable, durable, protects paints & plasters against harmful influences form within the masonry.

FEATURES & BENEFITS
•Fast drying, excellent adhesion to most building materials &no need to cure.
•Increase in durability & toughness of concrete.
•Increase flexural and bond strength of concrete .
•Forms a very tough bond with substrate having good permeability rating .
•High scrub & impact resistance
•Excellent elastomeric and crack bridging capability.
•Good weathering characteristics.
•No water absorption, withstanding hydrostatic pressure .
•Not susceptible to alkali degradation. Resistance to high alkali sulfates and salts.
•Good colour retention. High resistance to stain, dirt pickup & UV.
•Breathable coating, allows vapor transmission.

AREAS OF APPLICATION
•Waterproofing Membrane : Roof terraces, sunken portion of toilets & bathrooms, chhajas, balcony, etc.
•Concrete Repairs : Spalled concrete of slabs, chhajas, beams, columns, parapet, floor, etc.
•Waterproofing &/or Bonding Primer : Walls & slabs

METHOD OF APPLICATION
Clean the surface with wire brush, scrubber or air blower to remove hidden dirt, loose particles, laitance & dust. De-grease the surface by using suitable solvents, if needed.
•Bonding Primer – To be used as a clear bonding primer by diluting 1:5 with water. Apply on the walls before painting or during putty rendering.
•Waterproofing Primer – For priming of concrete substrate, the surface should be thoroughly saturated with Aquasill-99 solution (Dilution Ratio – 1 part LOCKSIL : 20 parts potable Water : 2 parts of KABU BOND).
•Waterproofing Membrane – For a waterproofing coating mix 1 part KABU BOND with 1 part of cement & 1 part of 100 mesh sand.
•Add water for brush ability.
•Brush apply the mix in span of 4-6 hours on the prepared concrete substrate. It is recommended to saturate the surface with LOCKSIL solution prior to this application.
•Overlay the coating with a protective screed to the desired slope and thickness.
•Coverage : 4-5 m² for a 0.2 mm (200 microns) coat.
•Repair Mortar & Renders, Floor Screed & PCC
•Prepare the Mortar in the following proportion : Cement 50 kg + Washed Sand 75 kg + 6 mm Down size aggregates 75 kg + KABUBOND6-7.5litres+Water 10 litres
•For PCC & Plaster work : KABU BOND 100 ml per bag cement (conforms to IS 2645 – 2003)